The choice of an ice machine to make ice for efficiency, speed and high output.
Whether it’s a bullet ice maker, or any other ice type, production and quality are the order of the day!
However, the machine does not always run smoothly, especially for users who do not always clean and maintain it, and sometimes there is a problem of low ice production.
Today the ice machine manufacturer will talk to you about how to solve the problem of reduced ice volume, taking the bullet ice machine as an example!
Let’s start with the reasons. There are five reasons for the decrease in ice machine output.
1.Blockage of capillary tube or expansion valve.
2.Excessive water in the system or a slight ice jam.
3.blockage in the condensing system of the bullet-head ice machine.
4.insufficient refrigerant or refrigerant leakage in the ice machine.
5.The evaporator is too dirty.
The reasons for the decrease in ice production vary, and in general the three problems are clogging, lack of refrigerant and cleaning.
If there is a blockage, unclog it; if the refrigerant is not enough, add it, if it leaks, check the location of the leak and repair it, and take out the evaporator to do the cleaning.
In addition, the system ice blockage is also mostly evaporator problems, pay attention to see if the evaporator is broken.
If you’re worried about mastering it yourself you can contact the ice machine manufacturer for assistance!
