Liquid nitrogen tanks, no matter what type and where they are used, in addition to a single open tank of suitable model, also need some supporting parts to assist the use. The purpose is to facilitate users, and different models have different configurations for different uses. Just like sperm storage commonly used 2-35 liters will be equipped with a round cylinder, as well as a neck plug, a locking cover, and a protective cover, the cell storage liquid nitrogen tank also has its own specifications and configurations.

Next, KGSQ factory will talk about the model specifications and configuration of cell storage liquid nitrogen tanks!

Cell storage liquid nitrogen tank model specifications:

Containers used for cell storage are mostly designed with large diameter and large capacity, with a capacity of 30-175 liters and a diameter of 125mm or more. The model specifications of different manufacturers are slightly different, but for cells and bacteria used in scientific research experiments, the model range is mostly like this.

Commonly used model specifications from small to large are as follows:

YDS-30-125, 31.5 liter capacity, 130mm diameter;

YDS-35-125, capacity 35.2 liters, diameter 130mm;

YDS-47-127, 48.5 liters volume, 130mm diameter, tank height 790mm;

YDS-50-125, total volume 52.1 liters, diameter 130mm, tank height 790mm;

YDS-65-216, 66.5 liter volume, 216mm diameter;

YDS-95-216, volume 97.2L, diameter 216mm;

YDS-115-216, with a volume of about 120.7 liters and a diameter of 216mm;

YDS-145-216, with a volume of about 147L, a diameter of 216mm, and a tank height of 955mm;

YDS-175-216, the volume is about 178L, the diameter is 216mm, and the total height of the jar is 1075mm.

Cell storage liquid nitrogen tank configuration:

Configuration refers to accessories other than the wide-neck liquid nitrogen tank, which are divided into standard configuration and optional configuration!

Standard configuration includes 1 neck plug, 1 lock lid, 6 square buckets (racks), the neck plug is made of polyurethane material, and is thermally insulated to prevent external heat and impurities from entering the tank. The lock cover has a lock buckle, and a small lock can be added to lock the sample to prevent it from being lost or accidentally taken by others. Freezing rack with freezing box for fixing and sorting cell tubes.

The optional equipment is an intelligent liquid level monitor and a five-wheel trolley. The former monitors the liquid level in real time and sends an alarm when the liquid level is too low to remind you to replenish the liquid. The latter facilitates the movement of the cell storage liquid nitrogen tank indoors and is flexible in operation.

These are the model specifications and configurations of cell storage liquid nitrogen tanks. Do you understand them?